Sunday, March 31, 2013

WIRING STARTED

I've been working on wiring for the last couple of weeks. It's a slow go but I'm moving right along. I am not able to instal a floor dimmer switch due to lack of space. Instead I have found a latching relay. This is connected to the cruise control button on the turn signal stalk. A momentary push flips the relay from high beam to low beam, back and forth. Here is a link to it:

http://www.oreillyauto.com/site/c/detail/BWD0/R3018.oap?pt=01839&ppt=C0111

This is how it is wired. The power input, 56, should come from a normal on/off relay triggered by the headlight switch. Jump 56 to 30. The signal is"S" and 56a and 56b are for hi and lo lights.





Most of the circuits for the engine are started and wires run. The lighting will take some time and lots of wire.