The next issue is the intermediate bearing. It has a pressed steel housing but no grease fitting. I'll order one with a cast iron housing with grease fitting.
here are the u-joints and the splined end of the old shaft.
I have taken over the build and web site for JZRUSA The continuation of this build will be posted on this blog. I feel it is important to do this for those others that are building one. What I present here is just my way of doing it. I don't claim to be any kind of expert so take this for what it's worth. It's free. To zoom pics click on pic then right click on pic, click "view image", click on pic.
Wednesday, August 1, 2012
Drive Shaft Issues
I started studying the drive shaft and realized the rear bearing is at such an angle that no grease will get to the bearing. The fix was to make a bearing bracket to make the bearing more vertical.
The next issue is the intermediate bearing. It has a pressed steel housing but no grease fitting. I'll order one with a cast iron housing with grease fitting.
here are the u-joints and the splined end of the old shaft.
The next issue is the intermediate bearing. It has a pressed steel housing but no grease fitting. I'll order one with a cast iron housing with grease fitting.
here are the u-joints and the splined end of the old shaft.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment